Code editor · templates · sensor monitor Which board are you using?
Pads triggering on their own?
Writes the factory default code.py for the board selected above with every pad's threshold set to 3000 (less sensitive). Your current code.py is saved as code.py.bak first.
SPOKE Mini
SPOKE Coding Playground
Templates
Tools
Sensor Monitor
Live pad readings & per-pad thresholds
code.py
Serial Console
Disconnected
Live View
No MIDI
Samples load when you connect MIDI
Pad Sensitivity
Pads firing on their own or too twitchy? Raise the threshold so a pad needs a firmer touch. Too high and pads stop responding.
3000
more sensitiveless sensitive
Pin Mapping
Tips
Ctrl+S / Cmd+S saves to the board
The board restarts automatically after saving
Connect serial to see errors and print() output
Red console text = errors, blue = info
Test your code with a MIDI monitor or the Live View above
Browser: this page uses the File System Access, Web Serial and Web MIDI APIs. Use Chrome, Edge or Opera — Firefox and Safari aren't supported.
Sensor Monitor
Open code.py to begin
Last serial line: none yet
How to use the Sensor Monitor click to collapse ▲
Touch events
0
MIDI events
0
Active sensors
0
Global threshold
--
Drag to set all at once, then fine-tune individually
Sensors
Orange bar = raw value | Yellow marker = threshold (drag to set) | Bar turns green when triggered